ETC Request ID: STIS.sp.1370117
Requested Signal/Noise Ratio = 5.000 at wavelength 1215.61 Å (per resolution element)
gives: Time = 13,467.3986 seconds
Exposure time calculation HAD WARNINGS.
WARNING MESSAGE: Partial overlap between instrument throughput band and target spectrum. Please doublecheck the wavelength range covered by the selected spectrum, and the instrument documentation for the selected filter.
Table of Source and Noise Counts per Pixel
| Detailed Information | Count rate | Total counts | Associated noise |
| (counts/s) | (counts) | (counts) | |
| Counts (box 7 pixels high) | (1 pix x 7 pix) | (2 pix resel x 7 pix) | |
| Source | 0.002 | 47.03 | 6.86 |
| Background | 0.002 | 41.43 | 6.44 |
| Sky | 4.882e-04 | 13.15 | 3.63 |
| Dark Current | 0.001 | 28.28 | 5.32 |
| Total in selected region | 0.003 | 88.46 | 9.41 |
| Brightest Pixel (single exposure) (at 1215.20 Å) | 0.007 | 97.83 | |
| Count rate entire detector | 170.787 | ||
| Buffer Time (sec) | 11,710.52 | ||
| For APT purposes, the recommended buffer time should be 4/5 of the buffer time calculated above. Please refer to the STIS Instrument Handbook for more details. | |||
|
|
|||
| Global Count Rates | |||
| Source only | 0.604 | 8,128.688 | |
| Background (sky+dark) | 170.183 | 2,291,923.48 | |
| Encircled energy fraction | 0.76 | ||
| Instrument name: | STIS |
| Mode: | spectroscopic |
| Detector: | FUVMAMA |
| Central Wavelength: | 1222 |
| Grating: | [G140M] R ~ 10000 |
| Aperture: | 52X0.05 |
| Glow region: | low |
| Target: [point source] | |
| Spectrum: | User uploaded spectrum: spec_233.dat |
| Extinction E(B-V): | None |
| Normalization: | None |
| Redshift: | None |
| Emission Lines: | None |
| Selected background: | |
| Sky Background: | |
| Level: |
Table of Source and Noise Counts per Pixel
These results were computed using: ETC version 27.2
